Quick Detail:
1.Adding the PCB on the pole
2.14505 also call 14500
3. Nominal Voltage: 6.4V; Charging Voltage: 7.3V
4. Rated Capacity: 600mAh
Specification:
No. |
Item |
General Parameter |
Remark |
|
1 |
Rated Capacity |
Typical |
600mAh |
Standard discharge(0.2C5A) after Standard charge |
Minimum |
550mAh |
|||
2 |
Nominal Voltage |
6.4V |
Mean OperationVoltage |
|
3 |
Voltage at end of |
4.0V |
Discharge Cut-off Voltage |
|
4 |
Charging Voltage |
7.3V |
|
|
5 |
Internal Impedance |
≤200mΩ |
Internal resistance measured at AC 1KHZ after 50% chargeThe measure must uses the new batteries that within one week after shipment and cycles less than 5 times |
|
6 |
Standard charge |
Constant Current 0.2C5A |
|
|
7 |
Standard discharge |
Constant current 0.2C5A |
|
|
8 |
Fast charge |
Constant Current 1.0C5A |
|
|
9 |
Fast discharge |
Constant current 1.0C5A |
|
|
10 |
Maximum Continuous Charge Current |
1.0 C5A |
|
|
11 |
Maximum Continuous Discharge Current |
1.5 C5A |
|
|
12 |
OperationTemperature Range |
Charge: 0~45℃ |
60±25%R.H. |
|
|
|
Discharge: -10~60℃ |
|
|
13 |
Storage Temperature Range |
Less than 1 year: -20~25℃ |
60±25%R.H. |
|
|
|
less than 3 months: -20~40℃ |
|
|
|
|
Less than 7 day : -20~65℃ |
|
|
14 |
Cell Dimension |
High:50.0±0.2 mm |
Initial Dimension |
|
|
|
Diameter: 14.0±0.4 mm |
|
Cell Structure:
D |
14.0±0.4 |
H |
49.0±0.2 |
Units |
mm |
Pictures:
14505 aa 600mah 3.2V Lifepo4 Battery Pack With Pcb For Flash Light
SUNLAND is one of the leading manufacturers and suppliers of lfr14505 aa 600mah 3.2v lifepo4 battery pack with pcb for flash light in China. Under strict quality control system, our quality energy storage products made in our own professional factory must be your best choice.